QtSerialPort, Проблема сборки QtSerialPort под Windows Опции

[kuzulis]

NAUGREEM,

А ты установи сниффер (например Free Serial Port Monitor) и проверь.

[Алексей1153]

Интересно - создатели терминалки так же делали?

а про какую именно речь ?

я думаю, там сделана вычитка порта, так что они всё равно его как-то дрюкают ) В чём-то разница между работой терминала и твоей программы должна быть

[NAUGREEM]

NAUGREEM,

А ты установи сниффер (например Free Serial Port Monitor) и проверь.

посмотрел:
в терминалке:

Порт открыт процессом "tcomu12.exe" (PID: 2540)
Запрос:15.03.2013 9:27:31.20364
 FF FF FF                                          ÿÿÿ
Ответ:15.03.2013 9:27:39.25064 (+0.0469 seconds)
 FF FF FF                                          ÿÿÿ
Порт закрыт

у меня:

Порт открыт процессом "cms.exe" (PID: 2416)
Порт закрыт
Порт открыт процессом "cms.exe" (PID: 2416)
Порт закрыт
Порт открыт процессом "cms.exe" (PID: 2416)
Порт закрыт
Порт открыт процессом "cms.exe" (PID: 2416)
Порт закрыт
Порт открыт процессом "cms.exe" (PID: 2416)
Порт закрыт
Порт открыт процессом "cms.exe" (PID: 2416)
Порт закрыт
Порт открыт процессом "cms.exe" (PID: 2416)
Порт открыт процессом "cms.exe" (PID: 2416)
Запрос:15.03.2013 8:14:15.32764
 FF                                                ÿ
Порт открыт процессом "cms.exe" (PID: 2416)
Порт открыт процессом "cms.exe" (PID: 2416)
 FF FF                                             ÿÿ
Ответ:15.03.2013 8:14:16.74964 (+0.0156 seconds)
 FF FF FF                                          ÿÿÿ
Запрос:15.03.2013 8:14:16.87464 (+0.1094 seconds)
.....

во первых - порт открылся только с 7-го раза, до этого возвращал ошибку 2 (отказано в доступе)
во вторых - во время дальнейшей работы почему-то постоянно открывался (в программе команды на открытие у меня в это время небыло...)

[kuzulis]

Мож у тебя вирус какой или троян?
Чудес не бывает (с).

Порт открыт процессом "cms.exe"

Это чей процесс?

[NAUGREEM]

Мож у тебя вирус какой или троян?
Чудес не бывает (с).

голая винда в виртуалке - везде с этого диска ставил и антивирусы ниразу не ругались...

Порт открыт процессом "cms.exe"

Это чей процесс?

это моя прога с этой либой)

на разных компах с блютузом такая-же шняга(
по USB нормально...

и почему на терминалку вирус не влияет?

может глюк из-за того, что у меня работа с портом в отдельном потоке?

таблицы системных вызовов:
в терминалке:

Раскрывающийся текст

,IRP_MJ_CREATE,DOWN,TRUE,0x0,74 00 63 00 6F 00 6D 00 75 00 31 00 32 00 2E 00 65 00 78 00 65 00 00 00 ,t.c.o.m.u.1.2...e.x.e...,
1,IRP_MJ_CREATE,UP,FALSE,0x0,,,
2,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),DOWN,FALSE,0x0,,,
3,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),UP,TRUE,0x0,00 C2 01 00 ,.A..,
4,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),DOWN,FALSE,0x0,,,
5,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),UP,TRUE,0x0,00 00 08 ,...,
6,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),DOWN,FALSE,0x0,,,
7,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),UP,TRUE,0x0,00 00 00 00 00 00 ,......,
8,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),DOWN,FALSE,0x0,,,
9,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),UP,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
10,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),DOWN,TRUE,0x0,80 25 00 00 ,?%..,
11,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),UP,FALSE,0x0,,,
12,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_CLR_RTS: Clear RTS),DOWN,FALSE,0x0,,,
13,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_CLR_RTS: Clear RTS),UP,FALSE,0x0,,,
14,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),DOWN,FALSE,0x0,,,
15,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),UP,FALSE,0x0,,,
16,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),DOWN,TRUE,0x0,00 00 08 ,...,
17,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),UP,FALSE,0x0,,,
18,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),DOWN,TRUE,0x0,00 00 00 00 11 13 ,......,
19,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),UP,FALSE,0x0,,,
20,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),DOWN,TRUE,0x0,01 00 00 00 00 00 00 00 00 02 00 00 00 02 00 00 ,................,
21,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),UP,FALSE,0x0,,,
22,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_PURGE: Purge requests),DOWN,TRUE,0x0,0F 00 00 00 ,....,
23,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_PURGE: Purge requests),UP,FALSE,0x0,,,
24,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_QUEUE_SIZE: Set queue size),DOWN,TRUE,0x0,00 08 00 00 00 08 00 00 ,........,
25,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_QUEUE_SIZE: Set queue size),UP,FALSE,0x0,,,
26,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_TIMEOUTS: Set timeouts),DOWN,TRUE,0x0,01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 0A 00 00 00 ,....................,
27,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_TIMEOUTS: Set timeouts),UP,FALSE,0x0,,,
28,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
29,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
30,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
31,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
32,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
33,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
....
1182,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
1183,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
1184,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
1185,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
1186,IRP_MJ_WRITE,DOWN,TRUE,0x0,FF ,y,
1187,IRP_MJ_WRITE,UP,TRUE,0x0,FF ,y,
1188,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
1189,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 ,....................,
1190,IRP_MJ_READ,DOWN,FALSE,0x0,,,
1191,IRP_MJ_READ,UP,TRUE,0x0,FF FF FF ,yyy,
1192,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
1193,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
1194,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
1195,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
1196,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
1197,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
1198,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
1199,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
....
1292,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),DOWN,FALSE,0x0,,,
1293,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_COMMSTATUS: Retrieve COM status),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
1294,IRP_MJ_CLOSE,DOWN,FALSE,0x0,,,
1295,IRP_MJ_CLOSE,UP,FALSE,0x0,,,

у меня:

Раскрывающийся текст

0,IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
1,IRP_MJ_CREATE,UP,FALSE,0x0,,,
2,IRP_MJ_CLOSE,DOWN,FALSE,0x0,,,
3,IRP_MJ_CLOSE,UP,FALSE,0x0,,,
4,IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
5,IRP_MJ_CREATE,UP,FALSE,0x0,,,
6,IRP_MJ_CLOSE,DOWN,FALSE,0x0,,,
7,IRP_MJ_CLOSE,UP,FALSE,0x0,,,
8,IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
9,IRP_MJ_CREATE,UP,FALSE,0x0,,,
10,IRP_MJ_CLOSE,DOWN,FALSE,0x0,,,
11,IRP_MJ_CLOSE,UP,FALSE,0x0,,,
12,IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
13,IRP_MJ_CREATE,UP,FALSE,0x0,,,
14,IRP_MJ_CLOSE,DOWN,FALSE,0x0,,,
15,IRP_MJ_CLOSE,UP,FALSE,0x0,,,
16,IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
17,IRP_MJ_CREATE,UP,FALSE,0x0,,,
18,IRP_MJ_CLOSE,DOWN,FALSE,0x0,,,
19,IRP_MJ_CLOSE,UP,FALSE,0x0,,,
20,IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
21,IRP_MJ_CREATE,UP,FALSE,0x0,,,
22,IRP_MJ_CLOSE,DOWN,FALSE,0x0,,,
23,IRP_MJ_CLOSE,UP,FALSE,0x0,,,
24,IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
25, IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
26, IRP_MJ_CREATE,UP,FALSE,0xc0000022,,,
27,IRP_MJ_CREATE,UP,FALSE,0x0,,,
28,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),DOWN,FALSE,0x0,,,
29,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),UP,TRUE,0x0,00 C2 01 00 ,.A..,
30,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),DOWN,FALSE,0x0,,,
31,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),UP,TRUE,0x0,00 00 08 ,...,
32,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),DOWN,FALSE,0x0,,,
33,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),UP,TRUE,0x0,00 00 00 00 00 00 ,......,
34,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),DOWN,FALSE,0x0,,,
35,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),UP,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
36,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),DOWN,FALSE,0x0,,,
37,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),UP,TRUE,0x0,00 C2 01 00 ,.A..,
38,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),DOWN,FALSE,0x0,,,
39,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),UP,TRUE,0x0,00 00 08 ,...,
40,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),DOWN,FALSE,0x0,,,
41,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),UP,TRUE,0x0,00 00 00 00 00 00 ,......,
42,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),DOWN,FALSE,0x0,,,
43,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),UP,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
44,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),DOWN,TRUE,0x0,00 C2 01 00 ,.A..,
45,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),UP,FALSE,0x0,,,
46,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),DOWN,FALSE,0x0,,,
47,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),UP,FALSE,0x0,,,
48,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),DOWN,TRUE,0x0,00 00 08 ,...,
49,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),UP,FALSE,0x0,,,
50,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),DOWN,TRUE,0x0,00 00 00 00 00 00 ,......,
51,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),UP,FALSE,0x0,,,
52,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),DOWN,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
53,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),UP,FALSE,0x0,,,
54,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_TIMEOUTS: Retrieve timeouts),DOWN,FALSE,0x0,,,
55,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_TIMEOUTS: Retrieve timeouts),UP,TRUE,0x0,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,....................,
56,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_TIMEOUTS: Set timeouts),DOWN,TRUE,0x0,FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,yyyy................,
57,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_TIMEOUTS: Set timeouts),UP,FALSE,0x0,,,
58,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_WAIT_MASK: Set current event mask),DOWN,TRUE,0x0,81 00 00 00 ,?...,
59,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_WAIT_MASK: Set current event mask),UP,FALSE,0x0,,,
60,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_WAIT_ON_MASK: Wait for event),DOWN,FALSE,0x0,,,
61, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_MODEMSTATUS: Retrieve modem status),DOWN,FALSE,0x0,,,
62, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_MODEMSTATUS: Retrieve modem status),UP,TRUE,0x0,00 00 00 00 ,....,
63, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_DTRRTS: Retrieve DTR and RTS),DOWN,FALSE,0x0,,,
64, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_DTRRTS: Retrieve DTR and RTS),UP,TRUE,0x0,03 00 00 00 ,....,
65, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_MODEMSTATUS: Retrieve modem status),DOWN,FALSE,0x0,,,
66, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_MODEMSTATUS: Retrieve modem status),UP,TRUE,0x0,00 00 00 00 ,....,
67, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_DTRRTS: Retrieve DTR and RTS),DOWN,FALSE,0x0,,,
68, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_DTRRTS: Retrieve DTR and RTS),UP,TRUE,0x0,03 00 00 00 ,....,
69, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),DOWN,FALSE,0x0,,,
70, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),UP,TRUE,0x0,00 C2 01 00 ,.A..,
71, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),DOWN,FALSE,0x0,,,
72, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),UP,TRUE,0x0,00 00 08 ,...,
73, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),DOWN,FALSE,0x0,,,
74, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),UP,TRUE,0x0,00 00 00 00 00 00 ,......,
75, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),DOWN,FALSE,0x0,,,
76, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),UP,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
77, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),DOWN,TRUE,0x0,80 25 00 00 ,?%..,
78, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),UP,FALSE,0x0,,,
79, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),DOWN,FALSE,0x0,,,
80, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),UP,FALSE,0x0,,,
81, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),DOWN,TRUE,0x0,00 00 08 ,...,
82, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),UP,FALSE,0x0,,,
83, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),DOWN,TRUE,0x0,00 00 00 00 00 00 ,......,
84, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),UP,FALSE,0x0,,,
85, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),DOWN,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
86, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),UP,FALSE,0x0,,,
87, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),DOWN,FALSE,0x0,,,
88, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),UP,TRUE,0x0,80 25 00 00 ,?%..,
89, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),DOWN,FALSE,0x0,,,
90, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),UP,TRUE,0x0,00 00 08 ,...,
91, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),DOWN,FALSE,0x0,,,
92, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),UP,TRUE,0x0,00 00 00 00 00 00 ,......,
93, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),DOWN,FALSE,0x0,,,
94, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),UP,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
95, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),DOWN,TRUE,0x0,80 25 00 00 ,?%..,
96, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),UP,FALSE,0x0,,,
97, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),DOWN,FALSE,0x0,,,
98, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),UP,FALSE,0x0,,,
99, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),DOWN,TRUE,0x0,00 00 08 ,...,
100, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),UP,FALSE,0x0,,,
101, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),DOWN,TRUE,0x0,00 00 00 00 00 00 ,......,
102, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),UP,FALSE,0x0,,,
103, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),DOWN,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
104, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),UP,FALSE,0x0,,,
105, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),DOWN,FALSE,0x0,,,
106, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),UP,TRUE,0x0,80 25 00 00 ,?%..,
107, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),DOWN,FALSE,0x0,,,
108, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),UP,TRUE,0x0,00 00 08 ,...,
109, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),DOWN,FALSE,0x0,,,
110, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),UP,TRUE,0x0,00 00 00 00 00 00 ,......,
111, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),DOWN,FALSE,0x0,,,
112, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),UP,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
113, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),DOWN,TRUE,0x0,80 25 00 00 ,?%..,
114, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),UP,FALSE,0x0,,,
115, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),DOWN,FALSE,0x0,,,
116, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),UP,FALSE,0x0,,,
117, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),DOWN,TRUE,0x0,00 00 08 ,...,
118, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),UP,FALSE,0x0,,,
119, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),DOWN,TRUE,0x0,00 00 00 00 00 00 ,......,
120, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),UP,FALSE,0x0,,,
121, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),DOWN,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
122, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),UP,FALSE,0x0,,,
123, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),DOWN,FALSE,0x0,,,
124, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),UP,TRUE,0x0,80 25 00 00 ,?%..,
125, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),DOWN,FALSE,0x0,,,
126, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),UP,TRUE,0x0,00 00 08 ,...,
127, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),DOWN,FALSE,0x0,,,
128, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),UP,TRUE,0x0,00 00 00 00 00 00 ,......,
129, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),DOWN,FALSE,0x0,,,
130, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),UP,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
131, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),DOWN,TRUE,0x0,80 25 00 00 ,?%..,
132, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),UP,FALSE,0x0,,,
133, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),DOWN,FALSE,0x0,,,
134, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),UP,FALSE,0x0,,,
135, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),DOWN,TRUE,0x0,00 00 08 ,...,
136, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),UP,FALSE,0x0,,,
137, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),DOWN,TRUE,0x0,00 00 00 00 00 00 ,......,
138, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),UP,FALSE,0x0,,,
139, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),DOWN,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
140, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),UP,FALSE,0x0,,,
141, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),DOWN,FALSE,0x0,,,
142, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_BAUD_RATE: Retrieve Baud Rate),UP,TRUE,0x0,80 25 00 00 ,?%..,
143, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),DOWN,FALSE,0x0,,,
144, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_LINE_CONTROL: Retrieve line control),UP,TRUE,0x0,00 00 08 ,...,
145, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),DOWN,FALSE,0x0,,,
146, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_CHARS: Retrieve special characters),UP,TRUE,0x0,00 00 00 00 00 00 ,......,
147, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),DOWN,FALSE,0x0,,,
148, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_GET_HANDFLOW: Retrieve handshake information),UP,TRUE,0x0,09 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 ,....?...........,
149, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),DOWN,TRUE,0x0,80 25 00 00 ,?%..,
150, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_BAUD_RATE: Set baud rate),UP,FALSE,0x0,,,
151, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_CLR_RTS: Clear RTS),DOWN,FALSE,0x0,,,
152, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_CLR_RTS: Clear RTS),UP,FALSE,0x0,,,
153, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),DOWN,FALSE,0x0,,,
154, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_DTR: Set DTR),UP,FALSE,0x0,,,
155, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),DOWN,TRUE,0x0,00 00 08 ,...,
156, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_LINE_CONTROL: Set line control),UP,FALSE,0x0,,,
157, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),DOWN,TRUE,0x0,00 00 00 00 00 00 ,......,
158, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_CHARS: Set special characters),UP,FALSE,0x0,,,
159, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),DOWN,TRUE,0x0,01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,................,
160, IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_SET_HANDFLOW: Set handshake information),UP,FALSE,0x0,,,
161, IRP_MJ_WRITE,DOWN,TRUE,0x0,FF ,y,
162, IRP_MJ_WRITE,UP,TRUE,0x0,FF ,y,
163, IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
164, IRP_MJ_CREATE,UP,FALSE,0xc0000022,,,
165, IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
166, IRP_MJ_CREATE,UP,FALSE,0xc0000022,,,
167, IRP_MJ_WRITE,DOWN,TRUE,0x0,FF ,y,
168, IRP_MJ_WRITE,UP,TRUE,0x0,FF ,y,
169, IRP_MJ_WRITE,DOWN,TRUE,0x0,FF ,y,
170, IRP_MJ_WRITE,UP,TRUE,0x0,FF ,y,
171,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_WAIT_ON_MASK: Wait for event),UP,TRUE,0x0,01 00 00 00 ,....,
172,IRP_MJ_READ,DOWN,FALSE,0x0,,,
173,IRP_MJ_READ,UP,TRUE,0x0,FF ,y,
174,IRP_MJ_READ,DOWN,FALSE,0x0,,,
175,IRP_MJ_READ,UP,FALSE,0x0,,,
176,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_WAIT_ON_MASK: Wait for event),DOWN,FALSE,0x0,,,
177,IRP_MJ_DEVICE_CONTROL (IOCTL_SERIAL_WAIT_ON_MASK: Wait for event),UP,TRUE,0x0,01 00 00 00 ,....,
178,IRP_MJ_READ,DOWN,FALSE,0x0,,,
179,IRP_MJ_READ,UP,TRUE,0x0,FF FF ,yy,
180,IRP_MJ_READ,DOWN,FALSE,0x0,,,
181,IRP_MJ_READ,UP,FALSE,0x0,,,

и собственно мой код, который эти вызовы плодит:

    QSerialPort dev;
    dev.setPort(QString(port));
    bool res = false;
    for (int i = 0; i < 30; i++)
    {
        if (dev.open(QIODevice::ReadWrite))
        {
            res = true;
            break;
        }
        msleep(100);
    }
    if (!res) return;
    qDebug("port %s opened", port.data());
    if (res) res = dev.setBaudRate(QSerialPort::Baud9600);
    if (res) res = dev.setDataBits(QSerialPort::Data8);
    if (res) res = dev.setParity(QSerialPort::NoParity);
    if (res) res = dev.setStopBits(QSerialPort::OneStop);
    if (res) res = dev.setFlowControl(QSerialPort::NoFlowControl);
    if (!res)
    {
        dev.close();
        return;
    }
    QByteArray wbuf, rbuf;
    wbuf.append((char)0xff);
    for (int i = 0; i < 5; i++)
    {
        dev.write(wbuf);
        dev.waitForBytesWritten(100);
        dev.waitForReadyRead(200);
        if (dev.bytesAvailable() > 0)
        {
            rbuf.append(dev.readAll());
            while (dev.waitForReadyRead(100)) rbuf.append(dev.readAll());
        }
        res = false;
        if (rbuf.contains(QByteArray(3, (char)0xff)))
        {
            res = true;
            break;
        }
    }
    if (!res)
    {
        dev.close();
        return id;
    }

[NAUGREEM]

Мож у тебя вирус какой или троян?
Чудес не бывает (с).

На всякий случай проверил всё свежим каспером - всё чисто...

Интересно - создатели терминалки так же делали?

а про какую именно речь ?

http://logic-bratsk.ru/radio/util/tstcomu/tstcomu.htm

[kuzulis]

Такое впечатление что у тебя несколько потоков пытаются открыть одно и то-же устройство.

Что это вообще за хренота?

...
24,IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
25, IRP_MJ_CREATE,DOWN,TRUE,0x0,63 00 6D 00 73 00 2E 00 65 00 78 00 65 00 00 00 ,c.m.s...e.x.e...,
26, IRP_MJ_CREATE,UP,FALSE,0xc0000022,,,
27,IRP_MJ_CREATE,UP,FALSE,0x0,,,
...

Разбирайся со своим кодом.

[NAUGREEM]

Такое впечатление что у тебя несколько потоков пытаются открыть одно и то-же устройство.

хм...
действительно...
я не подозревал, что QSerialPortInfo::availablePorts() пытается открыть все порты...

а как мне тогда посмотреть, какие порты есть в системе, не открывая их?
мне нужен вотчдог на отвалившиеся и появившиеся порты...

[kuzulis]

хм...
действительно...
я не подозревал, что QSerialPortInfo::availablePorts() пытается открыть все порты...

Он ничего не открывает сам.
Ты скорее всего вызываешь isBusy() или isValid(). Вот эти методы и открывают.
Просто не вызывай их.

а как мне тогда посмотреть, какие порты есть в системе, не открывая их?

см. выше.

мне нужен вотчдог на отвалившиеся и появившиеся порты...

Сам напиши.

Можешь взять код из QSerialDevice (master ветку) - класс SerialDeviceEnumerator:

http://gitorious.org/qserialdevice/qserial...eviceenumerator

Или из QExtSerialPort:

http://code.google.com/p/qextserialport/so...owse/#git%2Fsrc


А если по-простому - то просто по таймеру делай QSerialPortInfo::availablePorts() и все.

UPD: Если тебе нужен вачдог на выдергивание ранее открытого порта - то можешь просто приконнектиться к сигналу ResourceErorr.

Сообщение отредактировал kuzulis - 15.3.2013, 16:56

[NAUGREEM]

UPD: Если тебе нужен вачдог на выдергивание ранее открытого порта - то можешь просто приконнектиться к сигналу ResourceErorr.

спасибо!
поковыряю...